opt subtitle "HI-TECH Software Omniscient Code Generator (Lite mode) build 10920"

opt pagewidth 120

	opt lm

	processor	16F877A
clrc	macro
	bcf	3,0
	endm
clrz	macro
	bcf	3,2
	endm
setc	macro
	bsf	3,0
	endm
setz	macro
	bsf	3,2
	endm
skipc	macro
	btfss	3,0
	endm
skipz	macro
	btfss	3,2
	endm
skipnc	macro
	btfsc	3,0
	endm
skipnz	macro
	btfsc	3,2
	endm
indf	equ	0
indf0	equ	0
pc	equ	2
pcl	equ	2
status	equ	3
fsr	equ	4
fsr0	equ	4
c	equ	1
z	equ	0
pclath	equ	10
	FNCALL	_main,_SysInit
	FNCALL	_main,_DeviceInit
	FNCALL	_main,_DcMotorTest
	FNCALL	_DeviceInit,_flilflop_Enable
	FNCALL	_DcMotorTest,_flilflop_Enable
	FNROOT	_main
	FNCALL	intlevel1,_HIGH_ISR
	global	intlevel1
	FNROOT	intlevel1
	global	_INTCON
psect	text142,local,class=CODE,delta=2
global __ptext142
__ptext142:
_INTCON	set	11
	global	_PORTB
_PORTB	set	6
	global	_PORTC
_PORTC	set	7
	global	_PORTD
_PORTD	set	8
	global	_PORTE
_PORTE	set	9
	global	_TMR0
_TMR0	set	1
	global	_CARRY
_CARRY	set	24
	global	_GIE
_GIE	set	95
	global	_OPTION_REG
_OPTION_REG	set	129
	global	_TRISA
_TRISA	set	133
	global	_TRISB
_TRISB	set	134
	global	_TRISC
_TRISC	set	135
	global	_TRISD
_TRISD	set	136
	global	_TRISE
_TRISE	set	137
	global	_EEADR
_EEADR	set	269
	global	_EEDATA
_EEDATA	set	268
	global	_EECON1
_EECON1	set	396
	global	_EECON2
_EECON2	set	397
	global	_RD
_RD	set	3168
	global	_WR
_WR	set	3169
	global	_WREN
_WREN	set	3170
	file	"Test.as"
	line	#
psect cinit,class=CODE,delta=2
global start_initialization
start_initialization:

psect cinit,class=CODE,delta=2
global end_of_initialization

;End of C runtime variable initialization code

end_of_initialization:
clrf status
ljmp _main	;jump to C main() function
psect	cstackCOMMON,class=COMMON,space=1
global __pcstackCOMMON
__pcstackCOMMON:
	global	?_HIGH_ISR
?_HIGH_ISR:	; 0 bytes @ 0x0
	global	??_HIGH_ISR
??_HIGH_ISR:	; 0 bytes @ 0x0
	global	?_DcMotorTest
?_DcMotorTest:	; 0 bytes @ 0x0
	global	?_SysInit
?_SysInit:	; 0 bytes @ 0x0
	global	?_DeviceInit
?_DeviceInit:	; 0 bytes @ 0x0
	global	?_main
?_main:	; 0 bytes @ 0x0
	ds	5
	global	?_flilflop_Enable
?_flilflop_Enable:	; 0 bytes @ 0x5
	global	??_SysInit
??_SysInit:	; 0 bytes @ 0x5
	global	flilflop_Enable@OuputData
flilflop_Enable@OuputData:	; 1 bytes @ 0x5
	ds	1
	global	??_flilflop_Enable
??_flilflop_Enable:	; 0 bytes @ 0x6
	ds	1
	global	flilflop_Enable@Add
flilflop_Enable@Add:	; 1 bytes @ 0x7
	ds	1
	global	??_DeviceInit
??_DeviceInit:	; 0 bytes @ 0x8
	global	??_main
??_main:	; 0 bytes @ 0x8
psect	cstackBANK0,class=BANK0,space=1
global __pcstackBANK0
__pcstackBANK0:
	global	??_DcMotorTest
??_DcMotorTest:	; 0 bytes @ 0x0
	ds	3
;;Data sizes: Strings 0, constant 0, data 0, bss 0, persistent 0 stack 0
;;Auto spaces:   Size  Autos    Used
;; COMMON          14      8       8
;; BANK0           80      3       3
;; BANK1           80      0       0
;; BANK3           96      0       0
;; BANK2           96      0       0

;;
;; Pointer list with targets:



;;
;; Critical Paths under _main in COMMON
;;
;;   _DeviceInit->_flilflop_Enable
;;   _DcMotorTest->_flilflop_Enable
;;
;; Critical Paths under _HIGH_ISR in COMMON
;;
;;   None.
;;
;; Critical Paths under _main in BANK0
;;
;;   _main->_DcMotorTest
;;
;; Critical Paths under _HIGH_ISR in BANK0
;;
;;   None.
;;
;; Critical Paths under _main in BANK1
;;
;;   None.
;;
;; Critical Paths under _HIGH_ISR in BANK1
;;
;;   None.
;;
;; Critical Paths under _main in BANK3
;;
;;   None.
;;
;; Critical Paths under _HIGH_ISR in BANK3
;;
;;   None.
;;
;; Critical Paths under _main in BANK2
;;
;;   None.
;;
;; Critical Paths under _HIGH_ISR in BANK2
;;
;;   None.

;;
;;Main: autosize = 0, tempsize = 0, incstack = 0, save=0
;;

;;
;;Call Graph Tables:
;;
;; ---------------------------------------------------------------------------------
;; (Depth) Function   	        Calls       Base Space   Used Autos Params    Refs
;; ---------------------------------------------------------------------------------
;; (0) _main                                                 0     0      0      60
;;                            _SysInit
;;                         _DeviceInit
;;                        _DcMotorTest
;; ---------------------------------------------------------------------------------
;; (1) _DeviceInit                                           0     0      0      30
;;                    _flilflop_Enable
;; ---------------------------------------------------------------------------------
;; (1) _DcMotorTest                                          3     3      0      30
;;                                              0 BANK0      3     3      0
;;                    _flilflop_Enable
;; ---------------------------------------------------------------------------------
;; (1) _SysInit                                              0     0      0       0
;; ---------------------------------------------------------------------------------
;; (2) _flilflop_Enable                                      3     2      1      30
;;                                              5 COMMON     3     2      1
;; ---------------------------------------------------------------------------------
;; Estimated maximum stack depth 2
;; ---------------------------------------------------------------------------------
;; (Depth) Function   	        Calls       Base Space   Used Autos Params    Refs
;; ---------------------------------------------------------------------------------
;; (3) _HIGH_ISR                                             5     5      0       0
;;                                              0 COMMON     5     5      0
;; ---------------------------------------------------------------------------------
;; Estimated maximum stack depth 3
;; ---------------------------------------------------------------------------------

;; Call Graph Graphs:

;; _main (ROOT)
;;   _SysInit
;;   _DeviceInit
;;     _flilflop_Enable
;;   _DcMotorTest
;;     _flilflop_Enable
;;
;; _HIGH_ISR (ROOT)
;;

;; Address spaces:

;;Name               Size   Autos  Total    Cost      Usage
;;BITCOMMON            E      0       0       0        0.0%
;;EEDATA             100      0       0       0        0.0%
;;NULL                 0      0       0       0        0.0%
;;CODE                 0      0       0       0        0.0%
;;COMMON               E      8       8       1       57.1%
;;BITSFR0              0      0       0       1        0.0%
;;SFR0                 0      0       0       1        0.0%
;;BITSFR1              0      0       0       2        0.0%
;;SFR1                 0      0       0       2        0.0%
;;STACK                0      0       2       2        0.0%
;;ABS                  0      0       0       3        0.0%
;;BITBANK0            50      0       0       4        0.0%
;;BITSFR3              0      0       0       4        0.0%
;;SFR3                 0      0       0       4        0.0%
;;BANK0               50      3       3       5        3.8%
;;BITSFR2              0      0       0       5        0.0%
;;SFR2                 0      0       0       5        0.0%
;;BITBANK1            50      0       0       6        0.0%
;;BANK1               50      0       0       7        0.0%
;;BITBANK3            60      0       0       8        0.0%
;;BANK3               60      0       0       9        0.0%
;;BITBANK2            60      0       0      10        0.0%
;;BANK2               60      0       0      11        0.0%
;;DATA                 0      0       0      12        0.0%

	global	_main
psect	maintext,global,class=CODE,delta=2
global __pmaintext
__pmaintext:

;; *************** function _main *****************
;; Defined at:
;;		line 78 in file "D:\Product\PIC\LK-P16-F\Firmware\V03\PIC16F18F-F_Test_Code_17_0112\Each_Code\CH07_DCMotor\test_all_code.c"
;; Parameters:    Size  Location     Type
;;		None
;; Auto vars:     Size  Location     Type
;;		None
;; Return value:  Size  Location     Type
;;		None               void
;; Registers used:
;;		wreg, status,2, status,0, pclath, cstack
;; Tracked objects:
;;		On entry : 17F/0
;;		On exit  : 0/0
;;		Unchanged: 0/0
;; Data sizes:     COMMON   BANK0   BANK1   BANK3   BANK2
;;      Params:         0       0       0       0       0
;;      Locals:         0       0       0       0       0
;;      Temps:          0       0       0       0       0
;;      Totals:         0       0       0       0       0
;;Total ram usage:        0 bytes
;; Hardware stack levels required when called:    3
;; This function calls:
;;		_SysInit
;;		_DeviceInit
;;		_DcMotorTest
;; This function is called by:
;;		Startup code after reset
;; This function uses a non-reentrant model
;;
psect	maintext
	file	"D:\Product\PIC\LK-P16-F\Firmware\V03\PIC16F18F-F_Test_Code_17_0112\Each_Code\CH07_DCMotor\test_all_code.c"
	line	78
	global	__size_of_main
	__size_of_main	equ	__end_of_main-_main
	
_main:	
	opt	stack 5
; Regs used in _main: [wreg+status,2+status,0+pclath+cstack]
	line	79
	
l2648:	
;test_all_code.c: 79: SysInit();
	fcall	_SysInit
	line	80
;test_all_code.c: 80: DeviceInit();
	fcall	_DeviceInit
	line	81
;test_all_code.c: 81: while (1)
	
l702:	
	line	83
;test_all_code.c: 82: {
;test_all_code.c: 83: DcMotorTest();
	fcall	_DcMotorTest
	goto	l702
	line	84
	
l703:	
	line	81
	goto	l702
	
l704:	
	line	85
	
l705:	
	global	start
	ljmp	start
	opt stack 0
GLOBAL	__end_of_main
	__end_of_main:
;; =============== function _main ends ============

	signat	_main,88
	global	_DeviceInit
psect	text143,local,class=CODE,delta=2
global __ptext143
__ptext143:

;; *************** function _DeviceInit *****************
;; Defined at:
;;		line 65 in file "D:\Product\PIC\LK-P16-F\Firmware\V03\PIC16F18F-F_Test_Code_17_0112\Each_Code\CH07_DCMotor\test_all_code.c"
;; Parameters:    Size  Location     Type
;;		None
;; Auto vars:     Size  Location     Type
;;		None
;; Return value:  Size  Location     Type
;;		None               void
;; Registers used:
;;		wreg, status,2, status,0, pclath, cstack
;; Tracked objects:
;;		On entry : 0/0
;;		On exit  : 0/0
;;		Unchanged: 0/0
;; Data sizes:     COMMON   BANK0   BANK1   BANK3   BANK2
;;      Params:         0       0       0       0       0
;;      Locals:         0       0       0       0       0
;;      Temps:          0       0       0       0       0
;;      Totals:         0       0       0       0       0
;;Total ram usage:        0 bytes
;; Hardware stack levels used:    1
;; Hardware stack levels required when called:    2
;; This function calls:
;;		_flilflop_Enable
;; This function is called by:
;;		_main
;; This function uses a non-reentrant model
;;
psect	text143
	file	"D:\Product\PIC\LK-P16-F\Firmware\V03\PIC16F18F-F_Test_Code_17_0112\Each_Code\CH07_DCMotor\test_all_code.c"
	line	65
	global	__size_of_DeviceInit
	__size_of_DeviceInit	equ	__end_of_DeviceInit-_DeviceInit
	
_DeviceInit:	
	opt	stack 5
; Regs used in _DeviceInit: [wreg+status,2+status,0+pclath+cstack]
	line	67
	
l2638:	
;test_all_code.c: 67: flilflop_Enable(0X00,0X00);
	clrf	(?_flilflop_Enable)
	movlw	(0)
	fcall	_flilflop_Enable
	line	68
;test_all_code.c: 68: flilflop_Enable(0X01,0X00);
	clrf	(?_flilflop_Enable)
	movlw	(01h)
	fcall	_flilflop_Enable
	line	69
;test_all_code.c: 69: flilflop_Enable(0X02,0X00);
	clrf	(?_flilflop_Enable)
	movlw	(02h)
	fcall	_flilflop_Enable
	line	70
;test_all_code.c: 70: flilflop_Enable(0X03,0X00);
	clrf	(?_flilflop_Enable)
	movlw	(03h)
	fcall	_flilflop_Enable
	line	71
;test_all_code.c: 71: flilflop_Enable(0X04,0X00);
	clrf	(?_flilflop_Enable)
	movlw	(04h)
	fcall	_flilflop_Enable
	line	72
;test_all_code.c: 72: flilflop_Enable(0X05,0X00);
	clrf	(?_flilflop_Enable)
	movlw	(05h)
	fcall	_flilflop_Enable
	line	73
;test_all_code.c: 73: flilflop_Enable(0X06,0X00);
	clrf	(?_flilflop_Enable)
	movlw	(06h)
	fcall	_flilflop_Enable
	line	74
;test_all_code.c: 74: flilflop_Enable(0X07,0X00);
	clrf	(?_flilflop_Enable)
	movlw	(07h)
	fcall	_flilflop_Enable
	line	75
	
l699:	
	return
	opt stack 0
GLOBAL	__end_of_DeviceInit
	__end_of_DeviceInit:
;; =============== function _DeviceInit ends ============

	signat	_DeviceInit,88
	global	_DcMotorTest
psect	text144,local,class=CODE,delta=2
global __ptext144
__ptext144:

;; *************** function _DcMotorTest *****************
;; Defined at:
;;		line 39 in file "D:\Product\PIC\LK-P16-F\Firmware\V03\PIC16F18F-F_Test_Code_17_0112\Each_Code\CH07_DCMotor\test_all_code.c"
;; Parameters:    Size  Location     Type
;;		None
;; Auto vars:     Size  Location     Type
;;		None
;; Return value:  Size  Location     Type
;;		None               void
;; Registers used:
;;		wreg, status,2, status,0, pclath, cstack
;; Tracked objects:
;;		On entry : 0/0
;;		On exit  : 0/0
;;		Unchanged: 0/0
;; Data sizes:     COMMON   BANK0   BANK1   BANK3   BANK2
;;      Params:         0       0       0       0       0
;;      Locals:         0       0       0       0       0
;;      Temps:          0       3       0       0       0
;;      Totals:         0       3       0       0       0
;;Total ram usage:        3 bytes
;; Hardware stack levels used:    1
;; Hardware stack levels required when called:    2
;; This function calls:
;;		_flilflop_Enable
;; This function is called by:
;;		_main
;; This function uses a non-reentrant model
;;
psect	text144
	file	"D:\Product\PIC\LK-P16-F\Firmware\V03\PIC16F18F-F_Test_Code_17_0112\Each_Code\CH07_DCMotor\test_all_code.c"
	line	39
	global	__size_of_DcMotorTest
	__size_of_DcMotorTest	equ	__end_of_DcMotorTest-_DcMotorTest
	
_DcMotorTest:	
	opt	stack 5
; Regs used in _DcMotorTest: [wreg+status,2+status,0+pclath+cstack]
	line	40
	
l2642:	
;test_all_code.c: 40: flilflop_Enable(0X05, 0x10);
	movlw	(010h)
	bcf	status, 5	;RP0=0, select bank0
	bcf	status, 6	;RP1=0, select bank0
	movwf	(??_DcMotorTest+0)+0
	movf	(??_DcMotorTest+0)+0,w
	movwf	(?_flilflop_Enable)
	movlw	(05h)
	fcall	_flilflop_Enable
	line	41
	
l2644:	
;test_all_code.c: 41: _delay((unsigned long)((1000)*(16000000/4000.0)));
	opt asmopt_off
movlw  21
	bcf	status, 5	;RP0=0, select bank0
	bcf	status, 6	;RP1=0, select bank0
movwf	((??_DcMotorTest+0)+0+2),f
movlw	75
movwf	((??_DcMotorTest+0)+0+1),f
	movlw	209
movwf	((??_DcMotorTest+0)+0),f
u2227:
	decfsz	((??_DcMotorTest+0)+0),f
	goto	u2227
	decfsz	((??_DcMotorTest+0)+0+1),f
	goto	u2227
	decfsz	((??_DcMotorTest+0)+0+2),f
	goto	u2227
	clrwdt
opt asmopt_on

	line	43
	
l2646:	
;test_all_code.c: 43: flilflop_Enable(0X05, 0x20);
	movlw	(020h)
	bcf	status, 5	;RP0=0, select bank0
	bcf	status, 6	;RP1=0, select bank0
	movwf	(??_DcMotorTest+0)+0
	movf	(??_DcMotorTest+0)+0,w
	movwf	(?_flilflop_Enable)
	movlw	(05h)
	fcall	_flilflop_Enable
	line	44
;test_all_code.c: 44: _delay((unsigned long)((1000)*(16000000/4000.0)));
	opt asmopt_off
movlw  21
	bcf	status, 5	;RP0=0, select bank0
	bcf	status, 6	;RP1=0, select bank0
movwf	((??_DcMotorTest+0)+0+2),f
movlw	75
movwf	((??_DcMotorTest+0)+0+1),f
	movlw	209
movwf	((??_DcMotorTest+0)+0),f
u2237:
	decfsz	((??_DcMotorTest+0)+0),f
	goto	u2237
	decfsz	((??_DcMotorTest+0)+0+1),f
	goto	u2237
	decfsz	((??_DcMotorTest+0)+0+2),f
	goto	u2237
	clrwdt
opt asmopt_on

	line	45
	
l693:	
	return
	opt stack 0
GLOBAL	__end_of_DcMotorTest
	__end_of_DcMotorTest:
;; =============== function _DcMotorTest ends ============

	signat	_DcMotorTest,88
	global	_SysInit
psect	text145,local,class=CODE,delta=2
global __ptext145
__ptext145:

;; *************** function _SysInit *****************
;; Defined at:
;;		line 47 in file "D:\Product\PIC\LK-P16-F\Firmware\V03\PIC16F18F-F_Test_Code_17_0112\Each_Code\CH07_DCMotor\test_all_code.c"
;; Parameters:    Size  Location     Type
;;		None
;; Auto vars:     Size  Location     Type
;;		None
;; Return value:  Size  Location     Type
;;		None               void
;; Registers used:
;;		wreg, status,2
;; Tracked objects:
;;		On entry : 0/0
;;		On exit  : 0/0
;;		Unchanged: 0/0
;; Data sizes:     COMMON   BANK0   BANK1   BANK3   BANK2
;;      Params:         0       0       0       0       0
;;      Locals:         0       0       0       0       0
;;      Temps:          0       0       0       0       0
;;      Totals:         0       0       0       0       0
;;Total ram usage:        0 bytes
;; Hardware stack levels used:    1
;; Hardware stack levels required when called:    1
;; This function calls:
;;		Nothing
;; This function is called by:
;;		_main
;; This function uses a non-reentrant model
;;
psect	text145
	file	"D:\Product\PIC\LK-P16-F\Firmware\V03\PIC16F18F-F_Test_Code_17_0112\Each_Code\CH07_DCMotor\test_all_code.c"
	line	47
	global	__size_of_SysInit
	__size_of_SysInit	equ	__end_of_SysInit-_SysInit
	
_SysInit:	
	opt	stack 6
; Regs used in _SysInit: [wreg+status,2]
	line	49
	
l1762:	
;test_all_code.c: 49: TRISA = 0X0f;
	movlw	(0Fh)
	bsf	status, 5	;RP0=1, select bank1
	bcf	status, 6	;RP1=0, select bank1
	movwf	(133)^080h	;volatile
	line	50
;test_all_code.c: 50: TRISB = 0X01;
	movlw	(01h)
	movwf	(134)^080h	;volatile
	line	51
	
l1764:	
;test_all_code.c: 51: PORTB = 0X00;
	bcf	status, 5	;RP0=0, select bank0
	bcf	status, 6	;RP1=0, select bank0
	clrf	(6)	;volatile
	line	52
	
l1766:	
;test_all_code.c: 52: TRISC = 0x80;
	movlw	(080h)
	bsf	status, 5	;RP0=1, select bank1
	bcf	status, 6	;RP1=0, select bank1
	movwf	(135)^080h	;volatile
	line	53
;test_all_code.c: 53: PORTC = 0X00;
	bcf	status, 5	;RP0=0, select bank0
	bcf	status, 6	;RP1=0, select bank0
	clrf	(7)	;volatile
	line	54
;test_all_code.c: 54: TRISD = 0X00;
	bsf	status, 5	;RP0=1, select bank1
	bcf	status, 6	;RP1=0, select bank1
	clrf	(136)^080h	;volatile
	line	55
;test_all_code.c: 55: PORTD = 0X00;
	bcf	status, 5	;RP0=0, select bank0
	bcf	status, 6	;RP1=0, select bank0
	clrf	(8)	;volatile
	line	56
;test_all_code.c: 56: TRISE = 0X00;
	bsf	status, 5	;RP0=1, select bank1
	bcf	status, 6	;RP1=0, select bank1
	clrf	(137)^080h	;volatile
	line	57
;test_all_code.c: 57: PORTE = 0X00;
	bcf	status, 5	;RP0=0, select bank0
	bcf	status, 6	;RP1=0, select bank0
	clrf	(9)	;volatile
	line	60
	
l1768:	
;test_all_code.c: 60: OPTION_REG = 0b01000100;
	movlw	(044h)
	bsf	status, 5	;RP0=1, select bank1
	bcf	status, 6	;RP1=0, select bank1
	movwf	(129)^080h	;volatile
	line	61
	
l1770:	
;test_all_code.c: 61: INTCON = 0b10100100;
	movlw	(0A4h)
	movwf	(11)	;volatile
	line	62
	
l1772:	
;test_all_code.c: 62: TMR0 = 0X83;
	movlw	(083h)
	bcf	status, 5	;RP0=0, select bank0
	bcf	status, 6	;RP1=0, select bank0
	movwf	(1)	;volatile
	line	63
	
l696:	
	return
	opt stack 0
GLOBAL	__end_of_SysInit
	__end_of_SysInit:
;; =============== function _SysInit ends ============

	signat	_SysInit,88
	global	_flilflop_Enable
psect	text146,local,class=CODE,delta=2
global __ptext146
__ptext146:

;; *************** function _flilflop_Enable *****************
;; Defined at:
;;		line 26 in file "D:\Product\PIC\LK-P16-F\Firmware\V03\PIC16F18F-F_Test_Code_17_0112\Each_Code\CH07_DCMotor\test_all_code.c"
;; Parameters:    Size  Location     Type
;;  Add             1    wreg     unsigned char 
;;  OuputData       1    5[COMMON] unsigned char 
;; Auto vars:     Size  Location     Type
;;  Add             1    7[COMMON] unsigned char 
;; Return value:  Size  Location     Type
;;		None               void
;; Registers used:
;;		wreg, status,2, status,0
;; Tracked objects:
;;		On entry : 0/0
;;		On exit  : 0/0
;;		Unchanged: 0/0
;; Data sizes:     COMMON   BANK0   BANK1   BANK3   BANK2
;;      Params:         1       0       0       0       0
;;      Locals:         1       0       0       0       0
;;      Temps:          1       0       0       0       0
;;      Totals:         3       0       0       0       0
;;Total ram usage:        3 bytes
;; Hardware stack levels used:    1
;; Hardware stack levels required when called:    1
;; This function calls:
;;		Nothing
;; This function is called by:
;;		_DcMotorTest
;;		_DeviceInit
;; This function uses a non-reentrant model
;;
psect	text146
	file	"D:\Product\PIC\LK-P16-F\Firmware\V03\PIC16F18F-F_Test_Code_17_0112\Each_Code\CH07_DCMotor\test_all_code.c"
	line	26
	global	__size_of_flilflop_Enable
	__size_of_flilflop_Enable	equ	__end_of_flilflop_Enable-_flilflop_Enable
	
_flilflop_Enable:	
	opt	stack 5
; Regs used in _flilflop_Enable: [wreg+status,2+status,0]
;flilflop_Enable@Add stored from wreg
	movwf	(flilflop_Enable@Add)
	line	27
	
l1752:	
;test_all_code.c: 27: PORTD = OuputData;PORTB |= 0X10;
	movf	(flilflop_Enable@OuputData),w
	bcf	status, 5	;RP0=0, select bank0
	bcf	status, 6	;RP1=0, select bank0
	movwf	(8)	;volatile
	
l1754:	
	bsf	(6)+(4/8),(4)&7	;volatile
	line	28
;test_all_code.c: 28: PORTC = Add;
	movf	(flilflop_Enable@Add),w
	movwf	(7)	;volatile
	line	29
	
l1756:	
;test_all_code.c: 29: PORTB &= ~0X10;
	movlw	(0EFh)
	movwf	(??_flilflop_Enable+0)+0
	movf	(??_flilflop_Enable+0)+0,w
	andwf	(6),f	;volatile
	line	30
	
l1758:	
;test_all_code.c: 30: PORTB |= 0X10;
	bsf	(6)+(4/8),(4)&7	;volatile
	line	31
	
l687:	
	return
	opt stack 0
GLOBAL	__end_of_flilflop_Enable
	__end_of_flilflop_Enable:
;; =============== function _flilflop_Enable ends ============

	signat	_flilflop_Enable,8312
	global	_HIGH_ISR
psect	text147,local,class=CODE,delta=2
global __ptext147
__ptext147:

;; *************** function _HIGH_ISR *****************
;; Defined at:
;;		line 33 in file "D:\Product\PIC\LK-P16-F\Firmware\V03\PIC16F18F-F_Test_Code_17_0112\Each_Code\CH07_DCMotor\test_all_code.c"
;; Parameters:    Size  Location     Type
;;		None
;; Auto vars:     Size  Location     Type
;;		None
;; Return value:  Size  Location     Type
;;		None               void
;; Registers used:
;;		wreg, status,2, status,0
;; Tracked objects:
;;		On entry : 0/0
;;		On exit  : 0/0
;;		Unchanged: 0/0
;; Data sizes:     COMMON   BANK0   BANK1   BANK3   BANK2
;;      Params:         0       0       0       0       0
;;      Locals:         0       0       0       0       0
;;      Temps:          5       0       0       0       0
;;      Totals:         5       0       0       0       0
;;Total ram usage:        5 bytes
;; Hardware stack levels used:    1
;; This function calls:
;;		Nothing
;; This function is called by:
;;		Interrupt level 1
;; This function uses a non-reentrant model
;;
psect	text147
	file	"D:\Product\PIC\LK-P16-F\Firmware\V03\PIC16F18F-F_Test_Code_17_0112\Each_Code\CH07_DCMotor\test_all_code.c"
	line	33
	global	__size_of_HIGH_ISR
	__size_of_HIGH_ISR	equ	__end_of_HIGH_ISR-_HIGH_ISR
	
_HIGH_ISR:	
	opt	stack 5
; Regs used in _HIGH_ISR: [wreg+status,2+status,0]
psect	intentry,class=CODE,delta=2
global __pintentry
__pintentry:
global interrupt_function
interrupt_function:
	global saved_w
	saved_w	set	btemp+0
	movwf	saved_w
	swapf	status,w
	movwf	(??_HIGH_ISR+1)
	movf	fsr0,w
	movwf	(??_HIGH_ISR+2)
	movf	pclath,w
	movwf	(??_HIGH_ISR+3)
	bcf	status, 5	;RP0=0, select bank0
	bcf	status, 6	;RP1=0, select bank0
	movf	btemp+1,w
	movwf	(??_HIGH_ISR+4)
	ljmp	_HIGH_ISR
psect	text147
	line	34
	
i1l1760:	
;test_all_code.c: 34: INTCON &= ~0X04;
	movlw	(0FBh)
	movwf	(??_HIGH_ISR+0)+0
	movf	(??_HIGH_ISR+0)+0,w
	andwf	(11),f	;volatile
	line	35
;test_all_code.c: 35: TMR0 += 0X83;
	movlw	(083h)
	movwf	(??_HIGH_ISR+0)+0
	movf	(??_HIGH_ISR+0)+0,w
	addwf	(1),f	;volatile
	line	36
	
i1l690:	
	movf	(??_HIGH_ISR+4),w
	movwf	btemp+1
	movf	(??_HIGH_ISR+3),w
	movwf	pclath
	movf	(??_HIGH_ISR+2),w
	movwf	fsr0
	swapf	(??_HIGH_ISR+1)^0FFFFFF80h,w
	movwf	status
	swapf	saved_w,f
	swapf	saved_w,w
	retfie
	opt stack 0
GLOBAL	__end_of_HIGH_ISR
	__end_of_HIGH_ISR:
;; =============== function _HIGH_ISR ends ============

	signat	_HIGH_ISR,88
psect	text148,local,class=CODE,delta=2
global __ptext148
__ptext148:
	global	btemp
	btemp set 07Eh

	DABS	1,126,2	;btemp
	global	wtemp0
	wtemp0 set btemp
	end