opt subtitle "HI-TECH Software Omniscient Code Generator (Lite mode) build 10920"

opt pagewidth 120

	opt lm

	processor	16F877A
clrc	macro
	bcf	3,0
	endm
clrz	macro
	bcf	3,2
	endm
setc	macro
	bsf	3,0
	endm
setz	macro
	bsf	3,2
	endm
skipc	macro
	btfss	3,0
	endm
skipz	macro
	btfss	3,2
	endm
skipnc	macro
	btfsc	3,0
	endm
skipnz	macro
	btfsc	3,2
	endm
indf	equ	0
indf0	equ	0
pc	equ	2
pcl	equ	2
status	equ	3
fsr	equ	4
fsr0	equ	4
c	equ	1
z	equ	0
pclath	equ	10
	FNCALL	_main,_SysInit
	FNCALL	_main,_DeviceInit
	FNCALL	_DeviceInit,_flilflop_Enable
	FNROOT	_main
	FNCALL	_HIGH_ISR,_TxOut
	FNCALL	intlevel1,_HIGH_ISR
	global	intlevel1
	FNROOT	intlevel1
	global	_INTCON
psect	text162,local,class=CODE,delta=2
global __ptext162
__ptext162:
_INTCON	set	11
	global	_PORTB
_PORTB	set	6
	global	_PORTC
_PORTC	set	7
	global	_PORTD
_PORTD	set	8
	global	_PORTE
_PORTE	set	9
	global	_RCREG
_RCREG	set	26
	global	_RCSTA
_RCSTA	set	24
	global	_TMR0
_TMR0	set	1
	global	_TXREG
_TXREG	set	25
	global	_CARRY
_CARRY	set	24
	global	_GIE
_GIE	set	95
	global	_RCIF
_RCIF	set	101
	global	_OPTION_REG
_OPTION_REG	set	129
	global	_PIE1
_PIE1	set	140
	global	_SPBRG
_SPBRG	set	153
	global	_TRISA
_TRISA	set	133
	global	_TRISB
_TRISB	set	134
	global	_TRISC
_TRISC	set	135
	global	_TRISD
_TRISD	set	136
	global	_TRISE
_TRISE	set	137
	global	_TXSTA
_TXSTA	set	152
	global	_TRMT
_TRMT	set	1217
	global	_EEADR
_EEADR	set	269
	global	_EEDATA
_EEDATA	set	268
	global	_EECON1
_EECON1	set	396
	global	_EECON2
_EECON2	set	397
	global	_RD
_RD	set	3168
	global	_WR
_WR	set	3169
	global	_WREN
_WREN	set	3170
	file	"Test.as"
	line	#
psect cinit,class=CODE,delta=2
global start_initialization
start_initialization:

psect cinit,class=CODE,delta=2
global end_of_initialization

;End of C runtime variable initialization code

end_of_initialization:
clrf status
ljmp _main	;jump to C main() function
psect	cstackCOMMON,class=COMMON,space=1
global __pcstackCOMMON
__pcstackCOMMON:
	global	?_TxOut
?_TxOut:	; 0 bytes @ 0x0
	global	??_TxOut
??_TxOut:	; 0 bytes @ 0x0
	global	?_HIGH_ISR
?_HIGH_ISR:	; 0 bytes @ 0x0
	global	?_SysInit
?_SysInit:	; 0 bytes @ 0x0
	global	?_DeviceInit
?_DeviceInit:	; 0 bytes @ 0x0
	global	?_main
?_main:	; 0 bytes @ 0x0
	global	TxOut@data
TxOut@data:	; 1 bytes @ 0x0
	ds	1
	global	??_HIGH_ISR
??_HIGH_ISR:	; 0 bytes @ 0x1
	ds	5
	global	?_flilflop_Enable
?_flilflop_Enable:	; 0 bytes @ 0x6
	global	??_SysInit
??_SysInit:	; 0 bytes @ 0x6
	global	flilflop_Enable@OuputData
flilflop_Enable@OuputData:	; 1 bytes @ 0x6
	ds	1
	global	??_flilflop_Enable
??_flilflop_Enable:	; 0 bytes @ 0x7
	ds	1
	global	??_DeviceInit
??_DeviceInit:	; 0 bytes @ 0x8
	global	??_main
??_main:	; 0 bytes @ 0x8
psect	cstackBANK0,class=BANK0,space=1
global __pcstackBANK0
__pcstackBANK0:
	global	flilflop_Enable@Add
flilflop_Enable@Add:	; 1 bytes @ 0x0
	ds	1
;;Data sizes: Strings 0, constant 0, data 0, bss 0, persistent 0 stack 0
;;Auto spaces:   Size  Autos    Used
;; COMMON          14      8       8
;; BANK0           80      1       1
;; BANK1           80      0       0
;; BANK3           96      0       0
;; BANK2           96      0       0

;;
;; Pointer list with targets:



;;
;; Critical Paths under _main in COMMON
;;
;;   _DeviceInit->_flilflop_Enable
;;
;; Critical Paths under _HIGH_ISR in COMMON
;;
;;   _HIGH_ISR->_TxOut
;;
;; Critical Paths under _main in BANK0
;;
;;   _DeviceInit->_flilflop_Enable
;;
;; Critical Paths under _HIGH_ISR in BANK0
;;
;;   None.
;;
;; Critical Paths under _main in BANK1
;;
;;   None.
;;
;; Critical Paths under _HIGH_ISR in BANK1
;;
;;   None.
;;
;; Critical Paths under _main in BANK3
;;
;;   None.
;;
;; Critical Paths under _HIGH_ISR in BANK3
;;
;;   None.
;;
;; Critical Paths under _main in BANK2
;;
;;   None.
;;
;; Critical Paths under _HIGH_ISR in BANK2
;;
;;   None.

;;
;;Main: autosize = 0, tempsize = 0, incstack = 0, save=0
;;

;;
;;Call Graph Tables:
;;
;; ---------------------------------------------------------------------------------
;; (Depth) Function   	        Calls       Base Space   Used Autos Params    Refs
;; ---------------------------------------------------------------------------------
;; (0) _main                                                 0     0      0      44
;;                            _SysInit
;;                         _DeviceInit
;; ---------------------------------------------------------------------------------
;; (1) _DeviceInit                                           0     0      0      44
;;                    _flilflop_Enable
;; ---------------------------------------------------------------------------------
;; (1) _SysInit                                              0     0      0       0
;; ---------------------------------------------------------------------------------
;; (2) _flilflop_Enable                                      3     2      1      44
;;                                              6 COMMON     2     1      1
;;                                              0 BANK0      1     1      0
;; ---------------------------------------------------------------------------------
;; Estimated maximum stack depth 2
;; ---------------------------------------------------------------------------------
;; (Depth) Function   	        Calls       Base Space   Used Autos Params    Refs
;; ---------------------------------------------------------------------------------
;; (3) _HIGH_ISR                                             5     5      0      15
;;                                              1 COMMON     5     5      0
;;                              _TxOut
;; ---------------------------------------------------------------------------------
;; (4) _TxOut                                                1     1      0      15
;;                                              0 COMMON     1     1      0
;; ---------------------------------------------------------------------------------
;; Estimated maximum stack depth 4
;; ---------------------------------------------------------------------------------

;; Call Graph Graphs:

;; _main (ROOT)
;;   _SysInit
;;   _DeviceInit
;;     _flilflop_Enable
;;
;; _HIGH_ISR (ROOT)
;;   _TxOut
;;

;; Address spaces:

;;Name               Size   Autos  Total    Cost      Usage
;;BITCOMMON            E      0       0       0        0.0%
;;EEDATA             100      0       0       0        0.0%
;;NULL                 0      0       0       0        0.0%
;;CODE                 0      0       0       0        0.0%
;;COMMON               E      8       8       1       57.1%
;;BITSFR0              0      0       0       1        0.0%
;;SFR0                 0      0       0       1        0.0%
;;BITSFR1              0      0       0       2        0.0%
;;SFR1                 0      0       0       2        0.0%
;;STACK                0      0       6       2        0.0%
;;ABS                  0      0       0       3        0.0%
;;BITBANK0            50      0       0       4        0.0%
;;BITSFR3              0      0       0       4        0.0%
;;SFR3                 0      0       0       4        0.0%
;;BANK0               50      1       1       5        1.3%
;;BITSFR2              0      0       0       5        0.0%
;;SFR2                 0      0       0       5        0.0%
;;BITBANK1            50      0       0       6        0.0%
;;BANK1               50      0       0       7        0.0%
;;BITBANK3            60      0       0       8        0.0%
;;BANK3               60      0       0       9        0.0%
;;BITBANK2            60      0       0      10        0.0%
;;BANK2               60      0       0      11        0.0%
;;DATA                 0      0       0      12        0.0%

	global	_main
psect	maintext,global,class=CODE,delta=2
global __pmaintext
__pmaintext:

;; *************** function _main *****************
;; Defined at:
;;		line 93 in file "D:\Product\PIC\LK-P16-F\Firmware\V03\PIC16F18F-F_Test_Code_17_0112\Each_Code\CH06_Serial\test_all_code.c"
;; Parameters:    Size  Location     Type
;;		None
;; Auto vars:     Size  Location     Type
;;		None
;; Return value:  Size  Location     Type
;;		None               void
;; Registers used:
;;		wreg, status,2, status,0, pclath, cstack
;; Tracked objects:
;;		On entry : 17F/0
;;		On exit  : 0/0
;;		Unchanged: 0/0
;; Data sizes:     COMMON   BANK0   BANK1   BANK3   BANK2
;;      Params:         0       0       0       0       0
;;      Locals:         0       0       0       0       0
;;      Temps:          0       0       0       0       0
;;      Totals:         0       0       0       0       0
;;Total ram usage:        0 bytes
;; Hardware stack levels required when called:    4
;; This function calls:
;;		_SysInit
;;		_DeviceInit
;; This function is called by:
;;		Startup code after reset
;; This function uses a non-reentrant model
;;
psect	maintext
	file	"D:\Product\PIC\LK-P16-F\Firmware\V03\PIC16F18F-F_Test_Code_17_0112\Each_Code\CH06_Serial\test_all_code.c"
	line	93
	global	__size_of_main
	__size_of_main	equ	__end_of_main-_main
	
_main:	
	opt	stack 4
; Regs used in _main: [wreg+status,2+status,0+pclath+cstack]
	line	94
	
l2680:	
;test_all_code.c: 94: SysInit();
	fcall	_SysInit
	line	95
;test_all_code.c: 95: DeviceInit();
	fcall	_DeviceInit
	goto	l711
	line	97
;test_all_code.c: 97: while (1)
	
l710:	
	line	100
;test_all_code.c: 98: {
	
l711:	
	line	97
	goto	l711
	
l712:	
	line	101
	
l713:	
	global	start
	ljmp	start
	opt stack 0
GLOBAL	__end_of_main
	__end_of_main:
;; =============== function _main ends ============

	signat	_main,88
	global	_DeviceInit
psect	text163,local,class=CODE,delta=2
global __ptext163
__ptext163:

;; *************** function _DeviceInit *****************
;; Defined at:
;;		line 80 in file "D:\Product\PIC\LK-P16-F\Firmware\V03\PIC16F18F-F_Test_Code_17_0112\Each_Code\CH06_Serial\test_all_code.c"
;; Parameters:    Size  Location     Type
;;		None
;; Auto vars:     Size  Location     Type
;;		None
;; Return value:  Size  Location     Type
;;		None               void
;; Registers used:
;;		wreg, status,2, status,0, pclath, cstack
;; Tracked objects:
;;		On entry : 0/0
;;		On exit  : 0/0
;;		Unchanged: 0/0
;; Data sizes:     COMMON   BANK0   BANK1   BANK3   BANK2
;;      Params:         0       0       0       0       0
;;      Locals:         0       0       0       0       0
;;      Temps:          0       0       0       0       0
;;      Totals:         0       0       0       0       0
;;Total ram usage:        0 bytes
;; Hardware stack levels used:    1
;; Hardware stack levels required when called:    3
;; This function calls:
;;		_flilflop_Enable
;; This function is called by:
;;		_main
;; This function uses a non-reentrant model
;;
psect	text163
	file	"D:\Product\PIC\LK-P16-F\Firmware\V03\PIC16F18F-F_Test_Code_17_0112\Each_Code\CH06_Serial\test_all_code.c"
	line	80
	global	__size_of_DeviceInit
	__size_of_DeviceInit	equ	__end_of_DeviceInit-_DeviceInit
	
_DeviceInit:	
	opt	stack 4
; Regs used in _DeviceInit: [wreg+status,2+status,0+pclath+cstack]
	line	82
	
l2678:	
;test_all_code.c: 82: flilflop_Enable(0X00,0X00);
	clrf	(?_flilflop_Enable)
	movlw	(0)
	fcall	_flilflop_Enable
	line	83
;test_all_code.c: 83: flilflop_Enable(0X01,0X00);
	clrf	(?_flilflop_Enable)
	movlw	(01h)
	fcall	_flilflop_Enable
	line	84
;test_all_code.c: 84: flilflop_Enable(0X02,0X00);
	clrf	(?_flilflop_Enable)
	movlw	(02h)
	fcall	_flilflop_Enable
	line	85
;test_all_code.c: 85: flilflop_Enable(0X03,0X00);
	clrf	(?_flilflop_Enable)
	movlw	(03h)
	fcall	_flilflop_Enable
	line	86
;test_all_code.c: 86: flilflop_Enable(0X04,0X00);
	clrf	(?_flilflop_Enable)
	movlw	(04h)
	fcall	_flilflop_Enable
	line	87
;test_all_code.c: 87: flilflop_Enable(0X05,0X00);
	clrf	(?_flilflop_Enable)
	movlw	(05h)
	fcall	_flilflop_Enable
	line	88
;test_all_code.c: 88: flilflop_Enable(0X06,0X00);
	clrf	(?_flilflop_Enable)
	movlw	(06h)
	fcall	_flilflop_Enable
	line	89
;test_all_code.c: 89: flilflop_Enable(0X07,0X00);
	clrf	(?_flilflop_Enable)
	movlw	(07h)
	fcall	_flilflop_Enable
	line	90
	
l707:	
	return
	opt stack 0
GLOBAL	__end_of_DeviceInit
	__end_of_DeviceInit:
;; =============== function _DeviceInit ends ============

	signat	_DeviceInit,88
	global	_SysInit
psect	text164,local,class=CODE,delta=2
global __ptext164
__ptext164:

;; *************** function _SysInit *****************
;; Defined at:
;;		line 54 in file "D:\Product\PIC\LK-P16-F\Firmware\V03\PIC16F18F-F_Test_Code_17_0112\Each_Code\CH06_Serial\test_all_code.c"
;; Parameters:    Size  Location     Type
;;		None
;; Auto vars:     Size  Location     Type
;;		None
;; Return value:  Size  Location     Type
;;		None               void
;; Registers used:
;;		wreg, status,2
;; Tracked objects:
;;		On entry : 0/0
;;		On exit  : 0/0
;;		Unchanged: 0/0
;; Data sizes:     COMMON   BANK0   BANK1   BANK3   BANK2
;;      Params:         0       0       0       0       0
;;      Locals:         0       0       0       0       0
;;      Temps:          0       0       0       0       0
;;      Totals:         0       0       0       0       0
;;Total ram usage:        0 bytes
;; Hardware stack levels used:    1
;; Hardware stack levels required when called:    2
;; This function calls:
;;		Nothing
;; This function is called by:
;;		_main
;; This function uses a non-reentrant model
;;
psect	text164
	file	"D:\Product\PIC\LK-P16-F\Firmware\V03\PIC16F18F-F_Test_Code_17_0112\Each_Code\CH06_Serial\test_all_code.c"
	line	54
	global	__size_of_SysInit
	__size_of_SysInit	equ	__end_of_SysInit-_SysInit
	
_SysInit:	
	opt	stack 5
; Regs used in _SysInit: [wreg+status,2]
	line	56
	
l1786:	
;test_all_code.c: 56: TRISA = 0X0f;
	movlw	(0Fh)
	bsf	status, 5	;RP0=1, select bank1
	bcf	status, 6	;RP1=0, select bank1
	movwf	(133)^080h	;volatile
	line	57
;test_all_code.c: 57: TRISB = 0X01;
	movlw	(01h)
	movwf	(134)^080h	;volatile
	line	58
	
l1788:	
;test_all_code.c: 58: PORTB = 0X00;
	bcf	status, 5	;RP0=0, select bank0
	bcf	status, 6	;RP1=0, select bank0
	clrf	(6)	;volatile
	line	59
	
l1790:	
;test_all_code.c: 59: TRISC = 0x80;
	movlw	(080h)
	bsf	status, 5	;RP0=1, select bank1
	bcf	status, 6	;RP1=0, select bank1
	movwf	(135)^080h	;volatile
	line	60
;test_all_code.c: 60: PORTC = 0X00;
	bcf	status, 5	;RP0=0, select bank0
	bcf	status, 6	;RP1=0, select bank0
	clrf	(7)	;volatile
	line	61
;test_all_code.c: 61: TRISD = 0X00;
	bsf	status, 5	;RP0=1, select bank1
	bcf	status, 6	;RP1=0, select bank1
	clrf	(136)^080h	;volatile
	line	62
;test_all_code.c: 62: PORTD = 0X00;
	bcf	status, 5	;RP0=0, select bank0
	bcf	status, 6	;RP1=0, select bank0
	clrf	(8)	;volatile
	line	63
;test_all_code.c: 63: TRISE = 0X00;
	bsf	status, 5	;RP0=1, select bank1
	bcf	status, 6	;RP1=0, select bank1
	clrf	(137)^080h	;volatile
	line	64
;test_all_code.c: 64: PORTE = 0X00;
	bcf	status, 5	;RP0=0, select bank0
	bcf	status, 6	;RP1=0, select bank0
	clrf	(9)	;volatile
	line	67
	
l1792:	
;test_all_code.c: 67: OPTION_REG = 0b01000100;
	movlw	(044h)
	bsf	status, 5	;RP0=1, select bank1
	bcf	status, 6	;RP1=0, select bank1
	movwf	(129)^080h	;volatile
	line	68
	
l1794:	
;test_all_code.c: 68: INTCON = 0b10100100;
	movlw	(0A4h)
	movwf	(11)	;volatile
	line	69
	
l1796:	
;test_all_code.c: 69: TMR0 = 0X83;
	movlw	(083h)
	bcf	status, 5	;RP0=0, select bank0
	bcf	status, 6	;RP1=0, select bank0
	movwf	(1)	;volatile
	line	72
	
l1798:	
;test_all_code.c: 72: TXSTA = 0B00100000;
	movlw	(020h)
	bsf	status, 5	;RP0=1, select bank1
	bcf	status, 6	;RP1=0, select bank1
	movwf	(152)^080h	;volatile
	line	73
	
l1800:	
;test_all_code.c: 73: RCSTA = 0B10010000;
	movlw	(090h)
	bcf	status, 5	;RP0=0, select bank0
	bcf	status, 6	;RP1=0, select bank0
	movwf	(24)	;volatile
	line	74
	
l1802:	
;test_all_code.c: 74: SPBRG = 25;
	movlw	(019h)
	bsf	status, 5	;RP0=1, select bank1
	bcf	status, 6	;RP1=0, select bank1
	movwf	(153)^080h	;volatile
	line	75
	
l1804:	
;test_all_code.c: 75: PIE1 = 0B00100000;
	movlw	(020h)
	movwf	(140)^080h	;volatile
	line	76
	
l1806:	
;test_all_code.c: 76: INTCON = 0B11100100;
	movlw	(0E4h)
	movwf	(11)	;volatile
	line	78
	
l704:	
	return
	opt stack 0
GLOBAL	__end_of_SysInit
	__end_of_SysInit:
;; =============== function _SysInit ends ============

	signat	_SysInit,88
	global	_flilflop_Enable
psect	text165,local,class=CODE,delta=2
global __ptext165
__ptext165:

;; *************** function _flilflop_Enable *****************
;; Defined at:
;;		line 25 in file "D:\Product\PIC\LK-P16-F\Firmware\V03\PIC16F18F-F_Test_Code_17_0112\Each_Code\CH06_Serial\test_all_code.c"
;; Parameters:    Size  Location     Type
;;  Add             1    wreg     unsigned char 
;;  OuputData       1    6[COMMON] unsigned char 
;; Auto vars:     Size  Location     Type
;;  Add             1    0[BANK0 ] unsigned char 
;; Return value:  Size  Location     Type
;;		None               void
;; Registers used:
;;		wreg, status,2, status,0
;; Tracked objects:
;;		On entry : 0/0
;;		On exit  : 0/0
;;		Unchanged: 0/0
;; Data sizes:     COMMON   BANK0   BANK1   BANK3   BANK2
;;      Params:         1       0       0       0       0
;;      Locals:         0       1       0       0       0
;;      Temps:          1       0       0       0       0
;;      Totals:         2       1       0       0       0
;;Total ram usage:        3 bytes
;; Hardware stack levels used:    1
;; Hardware stack levels required when called:    2
;; This function calls:
;;		Nothing
;; This function is called by:
;;		_DeviceInit
;; This function uses a non-reentrant model
;;
psect	text165
	file	"D:\Product\PIC\LK-P16-F\Firmware\V03\PIC16F18F-F_Test_Code_17_0112\Each_Code\CH06_Serial\test_all_code.c"
	line	25
	global	__size_of_flilflop_Enable
	__size_of_flilflop_Enable	equ	__end_of_flilflop_Enable-_flilflop_Enable
	
_flilflop_Enable:	
	opt	stack 4
; Regs used in _flilflop_Enable: [wreg+status,2+status,0]
;flilflop_Enable@Add stored from wreg
	bcf	status, 5	;RP0=0, select bank0
	bcf	status, 6	;RP1=0, select bank0
	movwf	(flilflop_Enable@Add)
	line	26
	
l2670:	
;test_all_code.c: 26: PORTD = OuputData;PORTB |= 0X10;
	movf	(flilflop_Enable@OuputData),w
	movwf	(8)	;volatile
	
l2672:	
	bsf	(6)+(4/8),(4)&7	;volatile
	line	27
;test_all_code.c: 27: PORTC = Add;
	movf	(flilflop_Enable@Add),w
	movwf	(7)	;volatile
	line	28
	
l2674:	
;test_all_code.c: 28: PORTB &= ~0X10;
	movlw	(0EFh)
	movwf	(??_flilflop_Enable+0)+0
	movf	(??_flilflop_Enable+0)+0,w
	andwf	(6),f	;volatile
	line	29
	
l2676:	
;test_all_code.c: 29: PORTB |= 0X10;
	bsf	(6)+(4/8),(4)&7	;volatile
	line	30
	
l685:	
	return
	opt stack 0
GLOBAL	__end_of_flilflop_Enable
	__end_of_flilflop_Enable:
;; =============== function _flilflop_Enable ends ============

	signat	_flilflop_Enable,8312
	global	_HIGH_ISR
psect	text166,local,class=CODE,delta=2
global __ptext166
__ptext166:

;; *************** function _HIGH_ISR *****************
;; Defined at:
;;		line 44 in file "D:\Product\PIC\LK-P16-F\Firmware\V03\PIC16F18F-F_Test_Code_17_0112\Each_Code\CH06_Serial\test_all_code.c"
;; Parameters:    Size  Location     Type
;;		None
;; Auto vars:     Size  Location     Type
;;		None
;; Return value:  Size  Location     Type
;;		None               void
;; Registers used:
;;		wreg, status,2, status,0, pclath, cstack
;; Tracked objects:
;;		On entry : 0/0
;;		On exit  : 0/0
;;		Unchanged: 0/0
;; Data sizes:     COMMON   BANK0   BANK1   BANK3   BANK2
;;      Params:         0       0       0       0       0
;;      Locals:         0       0       0       0       0
;;      Temps:          5       0       0       0       0
;;      Totals:         5       0       0       0       0
;;Total ram usage:        5 bytes
;; Hardware stack levels used:    1
;; Hardware stack levels required when called:    1
;; This function calls:
;;		_TxOut
;; This function is called by:
;;		Interrupt level 1
;; This function uses a non-reentrant model
;;
psect	text166
	file	"D:\Product\PIC\LK-P16-F\Firmware\V03\PIC16F18F-F_Test_Code_17_0112\Each_Code\CH06_Serial\test_all_code.c"
	line	44
	global	__size_of_HIGH_ISR
	__size_of_HIGH_ISR	equ	__end_of_HIGH_ISR-_HIGH_ISR
	
_HIGH_ISR:	
	opt	stack 4
; Regs used in _HIGH_ISR: [wreg+status,2+status,0+pclath+cstack]
psect	intentry,class=CODE,delta=2
global __pintentry
__pintentry:
global interrupt_function
interrupt_function:
	global saved_w
	saved_w	set	btemp+0
	movwf	saved_w
	swapf	status,w
	movwf	(??_HIGH_ISR+1)
	movf	fsr0,w
	movwf	(??_HIGH_ISR+2)
	movf	pclath,w
	movwf	(??_HIGH_ISR+3)
	bcf	status, 5	;RP0=0, select bank0
	bcf	status, 6	;RP1=0, select bank0
	movf	btemp+1,w
	movwf	(??_HIGH_ISR+4)
	ljmp	_HIGH_ISR
psect	text166
	line	45
	
i1l1776:	
;test_all_code.c: 45: INTCON &= ~0X04;
	movlw	(0FBh)
	movwf	(??_HIGH_ISR+0)+0
	movf	(??_HIGH_ISR+0)+0,w
	andwf	(11),f	;volatile
	line	46
	
i1l1778:	
;test_all_code.c: 46: if (RCIF)
	btfss	(101/8),(101)&7
	goto	u2_21
	goto	u2_20
u2_21:
	goto	i1l1784
u2_20:
	line	48
	
i1l1780:	
;test_all_code.c: 47: {
;test_all_code.c: 48: TxOut(RCREG);
	movf	(26),w	;volatile
	fcall	_TxOut
	line	49
	
i1l1782:	
;test_all_code.c: 49: RCIF = 0;
	bcf	status, 5	;RP0=0, select bank0
	bcf	status, 6	;RP1=0, select bank0
	bcf	(101/8),(101)&7
	goto	i1l1784
	line	50
	
i1l700:	
	line	51
	
i1l1784:	
;test_all_code.c: 50: }
;test_all_code.c: 51: TMR0 += 0X83;
	movlw	(083h)
	movwf	(??_HIGH_ISR+0)+0
	movf	(??_HIGH_ISR+0)+0,w
	addwf	(1),f	;volatile
	line	52
	
i1l701:	
	movf	(??_HIGH_ISR+4),w
	movwf	btemp+1
	movf	(??_HIGH_ISR+3),w
	movwf	pclath
	movf	(??_HIGH_ISR+2),w
	movwf	fsr0
	swapf	(??_HIGH_ISR+1)^0FFFFFF80h,w
	movwf	status
	swapf	saved_w,f
	swapf	saved_w,w
	retfie
	opt stack 0
GLOBAL	__end_of_HIGH_ISR
	__end_of_HIGH_ISR:
;; =============== function _HIGH_ISR ends ============

	signat	_HIGH_ISR,88
	global	_TxOut
psect	text167,local,class=CODE,delta=2
global __ptext167
__ptext167:

;; *************** function _TxOut *****************
;; Defined at:
;;		line 32 in file "D:\Product\PIC\LK-P16-F\Firmware\V03\PIC16F18F-F_Test_Code_17_0112\Each_Code\CH06_Serial\test_all_code.c"
;; Parameters:    Size  Location     Type
;;  data            1    wreg     unsigned char 
;; Auto vars:     Size  Location     Type
;;  data            1    0[COMMON] unsigned char 
;; Return value:  Size  Location     Type
;;		None               void
;; Registers used:
;;		wreg
;; Tracked objects:
;;		On entry : 0/0
;;		On exit  : 0/0
;;		Unchanged: 0/0
;; Data sizes:     COMMON   BANK0   BANK1   BANK3   BANK2
;;      Params:         0       0       0       0       0
;;      Locals:         1       0       0       0       0
;;      Temps:          0       0       0       0       0
;;      Totals:         1       0       0       0       0
;;Total ram usage:        1 bytes
;; Hardware stack levels used:    1
;; This function calls:
;;		Nothing
;; This function is called by:
;;		_HIGH_ISR
;; This function uses a non-reentrant model
;;
psect	text167
	file	"D:\Product\PIC\LK-P16-F\Firmware\V03\PIC16F18F-F_Test_Code_17_0112\Each_Code\CH06_Serial\test_all_code.c"
	line	32
	global	__size_of_TxOut
	__size_of_TxOut	equ	__end_of_TxOut-_TxOut
	
_TxOut:	
	opt	stack 4
; Regs used in _TxOut: [wreg]
;TxOut@data stored from wreg
	movwf	(TxOut@data)
	line	33
	
i1l1768:	
;test_all_code.c: 33: while ((TXSTA&0X02 == 0));
	goto	i1l1770
	
i1l689:	
	goto	i1l1770
	
i1l688:	
	goto	i1l1770
	
i1l690:	
	line	34
	
i1l1770:	
;test_all_code.c: 34: TXREG = data;
	movf	(TxOut@data),w
	bcf	status, 5	;RP0=0, select bank0
	bcf	status, 6	;RP1=0, select bank0
	movwf	(25)	;volatile
	line	35
	
i1l691:	
	return
	opt stack 0
GLOBAL	__end_of_TxOut
	__end_of_TxOut:
;; =============== function _TxOut ends ============

	signat	_TxOut,4216
psect	text168,local,class=CODE,delta=2
global __ptext168
__ptext168:
	global	btemp
	btemp set 07Eh

	DABS	1,126,2	;btemp
	global	wtemp0
	wtemp0 set btemp
	end